Πετρέλαιο API και πολλαπλή φυσικού αερίου για τον εξοπλισμό καλά δοκιμής επιφάνειας AISI 4130
Υπεύθυνος : LEE
Τηλεφωνικό νούμερο : 86-13659253658
WhatsApp : +8613659253658
|
Λεπτομερής ενημέρωση |
|||
| Προϊόν: | Παγίδα άμμου | Εφαρμογή: | Υπηρεσία δοκιμών επιφάνειας φρεατίου |
|---|---|---|---|
| Πίεση Εργασίας: | 5000-15000 psi | Πρότυπο: | API 6α |
| Υλικό: | Κραματοποιημένος χάλυβας | Διανομή: | 40 μέρες |
| TPI: | SGS, BV | ||
| Επισημαίνω: | API sand trap wellhead equipment,surface testing sand separator,wellhead sand trap separator |
||
Περιγραφή προϊόντων
Sand Trap/catcher is designed as per API 6A standard for wellhead surface testing operation. High pressure sand trap is used to remove sands, proppants and other solid particles from high pressure and high yield gas well effluent to prevent erosion of downstream equipment. Typically the sand catcher is applied for completion cleanups, maximum sand-free rate tests, gas well production, testing and sand control after well fracturing, perforating bullet case,sand-gravel from formation.
Sand catchers are usually located between the wellhead systems and plug catchers &trash catchers and are great for flowback on all of your sand fractured stimulations and high pressure gas wells.
| Working pressure | 5,000 PSI/35 Mpa,10,000 PSI /70 Mpa,15,000 PSI/103.5 Mpa, |
| Working Temperature | -29 to 121 deg C[-4 to 250 deg F] |
| Gas flow capacity | up to 50 MM scf/d |
| Liquid flow capacity | 5,000 Bpd |
| Inlet and Outlet Connection | Union or Flange |
| Unions | Fig 602,Fig 1002,Fig 1502 |
| Flanges | API 6A Flanges |
| Design Codes | API SPEC.6A |
| Sour Service | Latest NACE MR O175 |
| Customizable is also available |
![]()
Εισάγετε το μήνυμά σας